Firmware Version Up

• Model Name
  • R550Pro / R550Pro-D / R550 / R550-D

• Improvement
  • Problems related to composite Misalignment Bug for Thermal / Visible image.
    Improved the problem (The composite position setting is invalid when the setting value reset of the environment setting menu (Set UP) is executed.

• Model Name
  • R550Pro / R550Pro-D / R550 / R550-D

• Improvement
  • When R550 is connected to NS9500PRO and take images using an external trigger, the visible image is not updated after the first frame. This issue was solved by the latest functional improvement.

• Model Name
  • R550Pro / R550Pro-D / R550 / R550-D

• Improvement
  • In rare occasion, a couple of lines showed up randomly on the thermal image when there was sudden change in the environmental temperature. This issue was solved by the latest functional improvement.

• Model Name
  • R550Pro / R550Pro-D / R550 / R550-D

• Improvement
  • Distance correction function is improved.
  • The problem that the visible image not displayed properly at the time of power start up is improved.
  • The problem that the occasional abnormal ambient temperature value inside of the camera is improved.

• * Caution
  The R550 Firmware Program is exclusive for R550 main unit. Be sure NOT to use this Firmware Program for other models.

• Model Name
  • R450Pro / R450Pro-D / R450 / R450-D

• Improvement
  • Problems related to composite Misalignment Bug for Thermal / Visible image.
    Improved the problem (The composite position setting is invalid when the setting value reset of the environment setting menu (Set UP) is executed.

• Model Name
  • R450Pro / R450Pro-D / R450 / R450-D

• Improvement
  • The autofocus function was operating for a narrow target area in the center. The target area has been modified to match the display during autofocus.

• Model Name
  • R450Pro / R450Pro-D / R450 /R450-D

• Improvement
  • In rare occasion, a couple of lines showed up randomly on the thermal image when there was sudden change in the environmental temperature. This issue was solved by the latest functional improvement.

• Model Name
  • R450Pro / R450Pro-D / R450 /R450-D

• Improvement
  • Distance correction function is improved.
  • The problem that the visible image not displayed properly at the time of power start up is improved.
  • The problem that the occasional abnormal ambient temperature value inside of the camera is improved.

• * Caution
  The R450 Firmware Program is exclusive for R450 main unit. Be sure NOT to use this Firmware Program for other models.

• Model Name
  • F50A-BAS / F50B-BAS / F50A-STD / F50B-STD / F50A-ONL / F50B-ONL

• Improvement
  • Corrected the phenomenon that LCD display becomes abnormal

• Model Name
  • F50A-BAS / F50B-BAS / F50A-STD / F50B-STD / F50A-ONL / F50B-ONL

• Improvement
  • Improved a battery level indication

• Model Name
  • F50A-BAS / F50B-BAS / F50A-STD / F50B-STD / F50A-ONL / F50B-ONL

• Enhancement
  • 7 languages of the menu display language was added.
    1. Spanish
    2. German
    3. Traditional Chinese
    4. Simplified Characters
    5. Korean
    6. Russian
    7. Italian

• * Caution
  The F50 Firmware Program is exclusive for F50 main unit. Be sure NOT to use this Firmware Program for other models.

• Model Name
  • R500EX-Pro / R500EX-Pro-D / R500EX / R500EX-D

• Improvement
  • Corrected the phenomenon that visual camera image becomes striped pattern

• * Caution
  The R500EX Firmware Program is exclusive for R500 main unit. Be sure NOT to use this Firmware Program for other models such as R500-Pro/R500-Pro-D/R500/R500-D.

Download
Please request URL, ID and password to download installer, by sending the form below.

• THE REQUEST FORM for PASSWORD DOWNLOAD

• Model Name
  • R500Pro / R500Pro-D / R500 / R500-D / R500S

• Improvement
  • Corrected the phenomenon that visual camera image becomes striped pattern

• Model Name
  • R500Pro / R500Pro-D / R500 / R500-D / R500S

• Enhancement
  • Adding the icon of Calibration Setting Status
  • Adding the display indication of "Drift Stabilizer ON"
  • Expanding the number of capturing image frames at Interval Saving
  • Available on execution of Auto Focus by "Wired Remote Control Unit"

• Improvement
  • Corrected file saving errors that occurred only infrequently
  • Corrected the error of No renewal of image capturing file number after 99999
  • Corrected the error that have been overwritten the files in the same number
  • Corrected the error that the files after No.10000 are not showing at the thumbnail
  • Corrected the phenomenon that the movie data does not play saved in the folder hierarchy
  • Corrected the phenomenon that the movie data after 3500 frames does not play
  • Corrected the error of stopping saving due to "Auto Energy Saving Mode" during "Movie Image Saving Mode or "Interval Image Saving"
  • Corrected the phenomenon that the visible image turn greenish at "Super Resolution Mode"
  • Corrected the error of hang up in the case of control focus slide on "InfReC Analyzer NS9500 Professional"
  • Corrected the setting error at startup
  • Corrected the error of icon remains shown during "ALL CLEAR function" which is setting of all indication off
  • Others

• * Caution
  The R500 Firmware Program is exclusive for R500 main unit. Be sure NOT to use this Firmware Program for other models such as R500EX-Pro/R500EX-Pro-D/R500EX/R500EX-D.

• Model Name
  • R300BP-TF: R03 or later
  • R300BP-TG / R300BP-OG / R300BP-OF: R01 or later

• Improvement
  • Corrected the phenomenon that visual camera image becomes striped pattern

• * Caution
  "R03" or "R01" shows the "revision number". This revision number is listed on the rating label at the bottom of camera.
  Please refer to the "Download Page" for more details.

• Model Name
  • R300BP-TF: R02 or earlier

• Enhancement (version 4.1C only)
  • Adding function for reversing thermal image for top, bottom, right and left

• Improvement
  • Corrected file saving errors that occurred only infrequently
  • Corrected the error that have been overwritten the files in the same number
  • Corrected the phenomenon that the "Emissivity Correction" does not work when using software "NS9500 Professional" on-line
  • Corrected the phenomenon that the movie data does not play saved in the folder hierarchy
  • Corrected the phenomenon that the number of whole frames of movie data displayed more than the actual due to the shortage of recording space

• * Caution
  "R02" shows the "revision number". This revision number is listed on the rating label at the bottom of camera.
  Please refer to the "Download Page" for more details.

• * Caution
  The R300BP series Firmware Program is exclusive for R300BP series main unit. Be sure NOT to use this Firmware Program for other models.

• Model Name
  • R300SR / R300SR-D / R300SR-H / R300SR-HD: R23 or later
  • R300SR-S / R300SR-SD: R22 or later

• Improvement
  • Corrected the phenomenon that visual camera image becomes striped pattern

• * Caution
  "R23" or "R22" shows the "Revision Number". This revision number is listed on the rating label at the bottom of camera.
  Please refer to the "Download Page" for more details.

• Model Name
  • R300SR / R300SR-D / R300SR-H / R300SR-HD: R23 or later
  • R300SR-S / R300SR-SD: R22 or later

• Enhancement (version 4.1C only)
  • Adding function for reversing thermal image for top, bottom, right and left

• Improvement
  • Corrected file saving errors that occurred only infrequently
  • Corrected the error that have been overwritten the files in the same number
  • Corrected the phenomenon that the "Emissivity Correction" does not work when using software "NS9500 Professional" on-line
  • Corrected the phenomenon that the movie data does not play saved in the folder hierarchy
  • Corrected the phenomenon that the number of whole frames of movie data displayed more than the actual due to the shortage of recording space

• Model Name
  • R300SR / R300SR-D / R300SR-H / R300SR-HD: R22 or earlier
  • R300SR-S / R300SR-SD: R21 or earlier

• Enhancement (version 4.1C only)
  • Adding function for reversing thermal image for top, bottom, right and left

• Improvement
  • Corrected file saving errors that occurred only infrequently
  • Corrected the error that have been overwritten the files in the same number
  • Corrected the phenomenon that the "Emissivity Correction" does not work when using software "NS9500 Professional" on-line
  • Corrected the phenomenon that the movie data does not play saved in the folder hierarchy
  • Corrected the phenomenon that the number of whole frames of movie data displayed more than the actual due to the shortage of recording space

• Model Name
  • R300SR / R300SR-D / R300SR-H / R300SR-HD: R22 or earlier
  • R300SR-S / R300SR-SD: R21 or earlier

• Corrected the phenomenon of hang-up occurred in the specific condition of interval recording mode.

• * Caution
  The R300SR Firmware Program is exclusive for R300SR main unit. Be sure NOT to use this Firmware Program for other models such as R300/R300D/R300S/R300SD/R300Z/R300ZD.

• Corrected bug that setting value isn't backed up occasionally.
• Corrected failure that temperature value becomes abnormal when thermal movie file stored with emissivity setting except 1.00 is played with application program (NS9500 Professional/NS9500 Standard/NS9500Lite).

• * Caution:
  Please do NOT use this FW to update
  R300S/R300SD/R300Z/R300ZD/ R300SR / R300SRD / R300SR-S / R300SR-SD / R300SR-H / R300SR-HD and any other products.

• Color palette [Olive] added
• 32 tone gradation added
• Grid overlay display feature added
• Some bugs fixed

• * Caution:
  Please do NOT use this FW to update R300S/ R300Z and any other products.

• Corrected wrong messages in Italian display menu.
• Corrected garbled messages in Chinese(Traditional) display menu.

• Fixed is a symptom that absence and anomaly of visible image happens occasionally when booted.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Model Name
  • G120EX / G100EX / G120EX-D / G100EX-D: R15 or later

• Improvement
  • Corrected the phenomenon that visual camera image becomes striped pattern

• * Caution
  "R15" shows the "revision number". This revision number is listed on the rating label at the bottom of camera.
  Please refer to the "Download Page" for more details.

• Model Name
  • G120EX / G100EX / G120EX-D / G100EX-D / G120 / G100 / G120D/ G100D

• Correction made on the phenomenon that ambient temperature was not updated in capturing IR motion image. (G120EX / G120EX-D / G120 / G120D only)
• Correction made on the phenomenon that thermal image may have contained the noise in a specific key operation during Auto Calibration is implemented. (G120EX / G100EX / G120EX-D / G100EX-D / G120 / G100 / G120D / G100D)

• Model Name
  • G120EX / G100EX / G120EX-D / G100EX-D / G120 / G100 / G120D/ G100D

• G120EX / G100EX added
• Default value of Median Filter to be "OFF"

• Model Name
  • G120 / G100 / G120D/ G100D

• Thermal image quality improvement. Correction to temperature inconsistency of saved images (that could happen only occasionally).
• Fix SD card memory problem that might happen only with USB1.1 standard.

• The phenomenon of hang-up occurrence during warm up massage with execution of auto focus is corrected. (G120 / G100 / G120D / G100D)
• The phenomenon of frame omission occurrence during 10Hz movie mode recording is corrected. (G120 / G120D)

• If you　turn on the color alarm from OFF state and display thermal image which is saved during ON state of color-alarm, failure of abnormal thermal image phenomenon is corrected. (G120 / G100 / G120D / G100D)
• During zoom ON with RUN state, if you display thermal image and switch to visual image, failure of left-right reversal image phenomenon is corrected. (G120 / G100 / G120D / G100D)
• After movie is recorded in movie mode, panorama mode is turned on, failure of still running sampling phenomenon is corrected. (G120 / G120D)
• After movie is saved in movie mode, failure of no-display phenomenon in thumbnail view is corrected. (G120 / G120D)
• If sense is not setup while movie file is being displayed in NS9500, failure display phenomenon is corrected. (G120 / G120D)
• After thermal image in panorama mode is saved, failure of disable panorama image phenomenon is corrected. (G120 / G120D)

• Corrected a failure that values of Level and Sense sometimes do not become optimal when Full Auto function (focus, level & sense) was executed.
• Corrected a failure that reverse image function did not become effective under specific set conditions.
• Corrected a failure that, at Range-interlocking mode, temperature range is not changed to proper one when Auto Level & Sense function was executed.
• Corrected a failure that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Functions related to Folder (Folder Creation, Selection, Name Change and Deletion) were added.
• Loop on the menu (Iteration from top to bottom) was added.
• A problem of indicating unusual temperature, that occurs when starting from Play mode and opening thermal images without mode change, was corrected.
• A problem that temperature scale (top and bottom end) becomes same as played thermal image, that occurs when changing from Play mode with thermal image opened to thermal image mode, was corrected.

• Function of adjusting the visual image position was improved.
• Some wordings were changed/corrected in German, Chinese (traditional & simplified) and Korean menus.
• On the battery indicator, the battery remaining ranges corresponding to each level 0-3 were changed.
• Failure of noises on visual image was corrected.
• It displays thermal image when a rotary switch is on incorrect position.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.
NOTE:
If your F30 is version 1.0B or older, it has to be upgraded at our factory.
Please contact your local distributor.

• Corrected a failure that values of Level and Sense sometimes do not become optimal when Full Auto function (focus, level & sense) was executed.
• Corrected a failure that, at Range-interlocking mode, temperature range is not changed to proper one when Auto Level & Sense function was executed.
• Corrected a failure that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Corrected infrequent problem that cameras resets or freezes after long-time continuous use.
• Fixed problem of camera freeze that sometimes happens if the LCD is opened/closed while the Stand-by mode is cancelled.
• Fixed infrequent problem of not saving visible images properly.
• Corrected problem that some setting conditions cause failure in updating multi-point temperature display.
• Added a function of color bar display on thermal image at S-Video output.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• There was a malfunction, which was reported during auto focus-use on TH9100, the firmware potentially make erroneous behaves and then the unit cannot startup afterward. By updating this firmware, this malfunction is corrected.

• Corrected problem that saved visual image become in Red.
• Corrected problem of TH9100 series that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Languages newly added on Menu: Danish, Norwegian, Finnish, Dutch and Swedish.
• Corrected infrequent problem of TH9100 series that same visual image is saved when obtaining series of visual images.
• Corrected problem that key control becomes invalid and display gets frozen when pressing 'C' key under certain conditions.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• There was a malfunction, which was reported during auto focus-use on TH9100, the firmware potentially make erroneous behaves and then the unit cannot startup afterward. By updating this firmware, this malfunction is corrected.

• Corrected problem that saved visual image become in Red.
• Corrected problem of TH9100 series that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Languages newly added on Menu: Danish, Norwegian, Finnish, Dutch and Swedish.
• Corrected infrequent problem of TH9100 series that same visual image is saved when obtaining series of visual images.
• Corrected problem that key control becomes invalid and display gets frozen when pressing 'C' key under certain conditions.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• There was a malfunction, which was reported during auto focus-use on TH9100, the firmware potentially make erroneous behaves and then the unit cannot startup afterward. By updating this firmware, this malfunction is corrected.

• Corrected problem that saved visual image become in Red.
• Corrected problem of TH9100 series that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Languages newly added on Menu: Danish, Norwegian, Finnish, Dutch and Swedish.
• Corrected infrequent problem of TH9100 series that same visual image is saved when obtaining series of visual images.
• Corrected problem that key control becomes invalid and display gets frozen when pressing 'C' key under certain conditions.

• Multi-Focus display function added.
  (The function which performs edge detection of acquired images, while moving the focus, and fuses them into an image with deeper depth of field.)
• Filtering function added.
  (Sharpness filter and Median filter)

• Added the Composite Image display funciton,when attaching an x2 Telephoto Lens, model TH91-384(Option).* is attached to the camera.
  *Note: this function is not available for x2 telephoto lens model TH91-382 (Option.)
• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

• New MENU operation added.
• New SELECT operation added.
• Users can select above new operation (Standard) or original operation (Classic).
• Focusing Point Finder added. The focusing gauge appears during auto-focusing.
• Users can check the firmware version from menu.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

***Cautions:
If you upgrade the firmware from version 5.3C (or earlier) to 5.4F (or later), the menu operation will be changed. CLICK HERE and request an instruction manual for TH9100 Series Operation Manual.

• There was a malfunction, which was reported during auto focus-use on TH9100, the firmware potentially make erroneous behaves and then the unit cannot startup afterward. By updating this firmware, this malfunction is corrected.

• Corrected problem that saved visual image become in Red.
• Corrected problem of TH9100 series that the Unit keeps alarming when it is in specific the condition of "RUN MODE".

• Languages newly added on Menu: Danish, Norwegian, Finnish, Dutch and Swedish.
• Corrected infrequent problem of TH9100 series that same visual image is saved when obtaining series of visual images.
• Corrected problem that key control becomes invalid and display gets frozen when pressing 'C' key under certain conditions.

• Multi-Focus display function added.
  (The function which performs edge detection of acquired images, while moving the focus, and fuses them into an image with deeper depth of field.)
• Filtering function added.
  (Sharpness filter and Median filter)

• Added the Composite Image display funciton,when attaching an x2 Telephoto Lens, model TH91-384(Option).* is attached to the camera.
  *Note: this function is not available for x2 telephoto lens model TH91-382 (Option.)
• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

• New MENU operation added.
• New SELECT operation added.
• Users can select above new operation (Standard) or original operation (Classic).
• Focusing Point Finder added. The focusing gauge appears during auto-focusing.
• Users can check the firmware version from menu.

• Added the Traditional Chinese, Chinese, Korean, Russian, Italian menu.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

***Cautions:
If you upgrade the firmware from version 5.3C (or earlier) to 5.4F (or later), the menu operation will be changed. CLICK HERE and request an instruction manual for TH9100 Series Operation Manual.

• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

• New MENU operation added.
• New SELECT operation added.
• Users can select above new operation (Standard) or original operation (Classic).
• Focusing Point Finder added. The focusing gauge appears during auto-focusing.
• Users can check the firmware version from menu.

• Added the Traditional Chinese, Chinese, Korean, Russian, Italian menu.
• "FILE" and “REPLAY" menu accessible during “RUN" status.
• During Replay (SIT or BMP), accessible to “DIRECTRY" menu.
• Delete an image on the Thumbnail selection menu.

• After changing a range,shortening a waiting period to be stabilized.

• Corrected the interruptive transfer problem of thermal imaging data on "IR-Motion program(TH91-757)", when AUTO focus function is done during the thermal imaging data transfer(60Hz).

• Changed the color of "SHINE COLOR" palette to emphasize contrast

• Chang RS232C parameter-setting, so as to recover the trouble of disappearance of image on LCD display due to changing of RS232C setting by resetarting camera.

• Added S/N Improvement Function (Σ32, Σ64).
• Added Visual Image Interval Saving Function.
  (Only available for saving on a memory card.)
• Added Emissivity Correction in Freeze mode.
• Added External Lens Correction.
• Added Emissivity Setup Table.
• Added Fine Color Pallet.
• Added Multilingual Display (selectable from English, Portuguese, Spanish, French, German or Japanese).

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

***Cautions:
If you upgrade the firmware from version 5.3C (or earlier) to 5.4F (or later), the menu operation will be changed. CLICK HERE and request an instruction manual for TH9100 Series Operation Manual.

• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

• New MENU operation added.
• New SELECT operation added.
• Users can select above new operation (Standard) or original operation (Classic).
• Focusing Point Finder added. The focusing gauge appears during auto-focusing.
• Users can check the firmware version from menu.

• Added the Traditional Chinese, Chinese, Korean, Russian, Italian menu.
• "FILE" and “REPLAY" menu accessible during “RUN" status.
• During Replay(SIT or BMP), accessible to “DIRECTRY" menu.
• Delete an image on the Thumbnail selection menu.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

***Cautions:
If you upgrade the firmware from version 5.3C (or earlier) to 5.4F (or later), the menu operation will be changed. CLICK HERE and request an instruction manual for TH9100 Series Operation Manual.

• Adding the composite image display function.
• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

• New MENU operation added.
• New SELECT operation added.
• Users can select above new operation (Standard) or original operation (Classic).
• Focusing Point Finder added. The focusing gauge appears during auto-focusing.
• Users can check the firmware version from menu.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Adding the composite image display function.
• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Uniformed the time-unit to “min" in NUC-interval setting and Auto standby-interval setting.
• Corrected the fault of the disappearance of setting menu partly due to the elimination setting (ON/OFF) of COLOR BAR, STATUS BAR and ALL, under the Japanese, Traditional Chinese, Simplified Chinese, and Korean language menu environment.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Corrected problem that saved visual image become in Red.

• Added the External Lens Compensation function.

• Added the Ambient Compensation function.
• Added the Background Compensation function.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Corrected problem that saved visual image become in Red.

• Added the automatic temperature level and sensitivity function.
• Added the maximum or minimum temperature display function.
• Added the alarm display function.
• Added the automatic gain control or level trace function.

• Added the External Lens Compensation function.

• Added the Ambient Compensation function.
• Added the Background Compensation function.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Corrected problem that saved visual image become in Red.

• Added the External Lens Compensation function.

• Added the Ambient Compensation function.
• Added the Background Compensation function.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Added the automatic temperature level and sensitivity function.
• Added the maximum or minimum temperature display function.
• Added the alarm display function.
• Added the automatic gain control or level trace function.

***About Instruction Manual:
If you need an instruction manual, CLICK HERE and send us a request form. You will be required to enter model number and serial number of your product. Please check them in advance.

• Error on max/min temperature display, that displays UNDER at Max setup and OVER at Min setup, when the image mode is FAST and frame rate is 60Hz.

***About Instruction Manual:
How to Obtain Additional Function Instruction Manual To obtain the Additional Function
Instruction Manual, send the following order form to NEC San-ei Instruments, Ltd. The manual will be sent via e-mail after confirmation of the model and serial number.
TH series Additional Function Instruction Manual Order Form

• Error on max/min temperature display, that displays UNDER at Max setup and OVER at Min setup, when the image mode is FAST and frame rate is 60Hz.

***About Instruction Manual:
How to Obtain Additional Function Instruction Manual To obtain the Additional Function
Instruction Manual, send the following order form to NEC San-ei Instruments, Ltd. The manual will be sent via e-mail after confirmation of the model and serial number.
TH series Additional Function Instruction Manual Order Form