Infrared Thermal Imager
Thermo Tracer TH7800 / TH7700

Firmware Update Download

 
How to Update

Software Name:TH7800 / TH7700 Firmware Program
Supported Models:TH7800 (Before the SNo.6040560) / TH7700 (Before the SNo.6040250)
[TH7800 User]
File Name:th7800upload.exe (Self-extracting file) (EXE:2.67MB)
[TH7700 User]
File Name:th7700upload.exe (Self-extracting file) (EXE:2.26MB)

When upgrading, follow the instructions below. Failure to do so may damage the embedded flash memory in the TH7800/TH7700 main unit, causing improper operation. If the TH7800/TH7700 does not function correctly, it must be repaired by Nippon Avionics. (Repair available at cost.)
  1. Cautions

    1. TH7800/TH7700 Firmware Program is exclusive for TH7800/TH7700 main unit. Be sure not to use the upgrade firmware for other models such as TH7800N. Check the nameplate on bottom of the main unit for the model number.

      name plate

    2. Please don't upgrade the firmware in the main unit of special edition.
    3. Always use the AC adapter for power supply when upgrading the firmware. Do not use batteries while upgrading, in order to avoid accidental power supply interruption.
    4. Never remove the compact flash card during firmware upgrading.
    5. If the thermal image data recorded in the TH7800/TH7700 is required, back up this data before performing the upgrade.
  2. Required Equipment

    1. TH7800/TH7700 main unit
    2. AC adapter
    3. PC (USB I/F: The USB board that corresponds to USB2.0, OS: Microsoft Windows 2000 or Microsoft Windows XP)
    4. USB cable
  3. Procedure

    1. [TH7800 User]
    2. Download th7800upload.exe to a folder. After downloading this program, open the folder with the Explorer.
    3. Double-click th7800upload.exe to decompress the firmware program files and the update contents in the current folder.

    4. [TH7700 User]
    5. Download th7700upload.exe to a folder. After downloading this program, open the folder with the Explorer.
    6. Double-click th7700upload.exe to decompress the firmware program files and the update contents in the current folder.
      [TH7800]
       Firmware program   :TH78I.CMP
       Firmware upload program   :THUpload.exe
       :USBapl.dll
       Update contents file   :ReadMe_th7800upload(ENG).txt 
       Update contents file   :ReadMe_th7800upload(JPN).txt 
       Firmware upload program User's Manual   :firmware_upload(ENG).pdf 
       Firmware upload program User's Manual   :firmware_upload(JPN).pdf 
      [TH7700]
       Firmware program   :TH7700.CMP
       Firmware upload program   :THUpload.exe
       :USBapl.dll
       Update contents file   :ReadMe_th7800upload(ENG).txt 
       Firmware upload program User's Manual   :firmware_upload(ENG).pdf 
    7. Turn on the power.
    8. A firmware upload program (THUpload.exe) is used to transmit the decompressed firmware program (TH7800:TH78I.CMP, TH7700:TH7700.CMP) to TH7800/TH7700 main unit. Please refer to the User's Manual for the upload program (firmware_upload(ENG).pdf) about how to operate the firmware upload program.
    9. Turn off the power.
    10. Turn on the power while pressing the E key (the center of a joy stick) in the TH7800/TH7700 main unit. Keep pressing the E key. Firmware upgrading starts.
    11. After 10 to 30 seconds following power-up while pressing the E key, the update screen of the TH7800/TH7700 main unit appears. Firmware upgrading starts. Release the E key after this screen is displayed.
      Update screen       
      Update screen
    12. Update completes after a few minutes, then below initialization screen appears.
      Initialization screen       
      Initialization screen
    13. Make sure the camera starts up normally and below Run screen is displayed.
      Run screen       
      Run screen
  1. Version Display

    Follow below instructions and check if updated version is identical to the version shown on the initially uncompressed file.

    1. Go to “SETUP" on menu and select “VERSION", then press the E key.
    2. The Version screen shows up as follows.
      Version screen       
      Version screen
  1. Others

    1. All copyrights on this software are reserved by Nippon Avionics. Unauthorized copying, reproduction, or modification of this software in whole or in part is prohibited.
    2. Copying of this software is authorized only when upgrading the firmware embedded in the TH7800/TH7700 main unit. No part of this software may be copied for other purposes.
    3. The contents of this software are subject to change without prior notice.
    4. This software is intended for Nippon Avionics customers who have purchased the TH7800/TH7700.
  1. Download

    [TH7800 User]

    The file to download: th7800upload.exe (Self-extracting file) (EXE:2.67MB)

    [TH7700 User]

The file to download: th7700upload.exe (Self-extracting file) (EXE:2.26MB)

 

Infrared Thermal Imaging Camera Support
Products
Micro Joining Equipment
Infrared Thermal Imaging Camera
Support
Infrared Thermal Imaging Camera
Intelligent Projector
Company Profile
Company's Outline
History
Offices
Contact Us
Micro Joining Equipment
Infrared Thermal Imaging Camera
Multi-Layered Board (product-mlb@ml.avio.co.jp)
Radiation Hardened POL DC/DC CONVERTER (product-me@ml.avio.co.jp)