Thermal Camera Module For Security & Surveillance Monitoring S200C series : Specifications
Discontinued Models
Main Unit | S200C | S210C | |
---|---|---|---|
Detector | 320x240 Uncooled Focal Plane Array (VOx microbolometer) | ||
Pixel Size | 23.5μm | ||
Spectral Range | 8 to 14μm | ||
Thermal Sensitivity (NETD) | < 80mK (with F1.4 Lens), < 40mK (with F1.0 Lens) | ||
Sensor Frame Rate | 60Hz | 8.5Hz | |
Dynamic Range | -40°C to +120°C | ||
Image Quality Improvement | Brightness | AUTO, MANUAL (64step) | |
Contrast | AUTO, MANUAL (64step) | ||
Integrated Image Enhancement (NICE) |
OFF, 1, 2, 3, 4, 5 | ||
Sharpness | OFF, 1, 2, 3, 4, 5 | ||
Averaging | OFF, L, M, H | ||
Gamma Correction | ON, OFF | ||
Display Processing | Polarity | White-hot, Black-hot | |
Color Palette | Mono, Color1, Color2 | ||
Digital Zoom | x1.0 to x4.0 (continuously variable with 0.1 increment) | ||
Flip Image | ON, OFF | ||
Privacy Mask | ON, OFF, selecting predefined blocks (0~395) | ||
Color Emphasis | Off / Over / Under (0~255) | ||
Composite Video Output | NTSC (30Hz) or PAL (25Hz) | ||
Digital Output | ITU-R, BT656 video data / 16bit raw data | ||
Control Interface | RS-232C or RS-485 | ||
Control Protocol | RS-232C | Nippon Avionics original | |
RS-485 | Pelco-D (OSD Menu operation only) | ||
External Trigger I/O | Input | NUC execution command (Non Uniformity Correction) | |
Output | Alarm signal, NUC status | ||
Alarm Signal Trigger | Brightness (Color Emphasis) | ||
Power Supply | 12VDC±10% | ||
Power Consumption | Typical | 7.5W at 25°C | |
Maximum | 12W at -30°C | ||
Operating Environment Conditions | -20°C to +60°C, at< 90%Rh (with no condensation) | ||
Vibration | 9.8 m/sec2, 10 to 55Hz(IEC60068-2-6/ JIS C 0040) | ||
Size (Without Lens/ Protrusion) | 62(W) x62(H) x80.5(D) mm | ||
Weight (Without Lens) | 300g |
- • Specifications and outline on this page are subject to change without notice for improvement.
- • Company names and commodity names are trade names or registered trade marks of each company.
- • Nippon Avionics Co., Ltd. will not be responsible for any damage of infrared detectors due to incoming strong light (e.g. laser) through lens(es).
- • This product is subject to Japanese Export Control Law. Depending on its destination, prior assessment and authorization may be required. When exporting from country of initial purchase destination, please be sure to follow that country's export regulations as it may require an export permit beforehand.