NS9500STD for F50 (NS9500 Standard) Multi-Function Report Generator Program Free Update Program

Version 2.9H / 3.0

Thank you very much for your using our NS9500STD for F50 (NS9500 Standard for F50).
This is a free service to update the NS9500STD for F50 (NS9500 Standard for F50) version 2.9H / 3.0.

Remarks

Please uninstall any older version first (if any) before installation of the latest one.

The points of change from version 2.9C to 2.9H / 3.0

  • Corrected the error of report output function.

Software Overview

Software name InfRec Analyzer NS9500 Standard for F50
Version 2.9H
Supported Models Thermo FLEX F50 series: R03 or earlier
* Caution
"R03" shows the "revision number". This revision number is listed on the rating label at the bottom of the camera.
File Name and Size NS9500STD_forF50_V2_9H.zip (52.2 MB)

Software name InfReC Analyzer NS9500 Standard for F50
Version 3.0
Supported Models Thermo FLEX F50 series: R21
* Caution
"R21" shows the "revision number". This revision number is listed on the rating label at the bottom of the camera.
File Name and Size NS9500LTNS9500STD_forF50_V3_0.zip (50.9MB)

Rating label

F50Series
The rating label is attached to the bottom of the camera.

Rating label

Please confirm whether the model of present use is applied to the object model and the object file before downloading.

System Requirements

  • Windows10 Home(32bit/64bit) / Windows10 Pro (32bit/64bit) / Windows10 Enterprise (32bit/64bit)
  • Windows7 Ultimate (32bit/64bit)/ Professional (32bit/64bit) /Home Premium (32bit/64bit)

Procedure

  1. Find the request form from the below link, complete and send it to us.
  2. URL (web address), ID and password for download will be sent to your e-mail address (after validation of the request that might takes few days).
  3. Download and save "NS9500STD_forF50_V2_9H.zip" or "NS9500STD_forF50_V3_0.zip" to your designated folder.
  4. Launch "NS9500STD_forF50_V2_9H.zip" or "NS9500STD_forF50_V3_0.zip" to be extracted into a folder you choose in your PC.
  5. Start the AutoRun.EXE in an appropriate folder and install, following instructions to come up.

Download

Please request URL, ID and password to download installer, by sending the form below.
Please have your NS9500 ready as its serial number is required for installation.

Version up program

Supported Models Thermo FLEX F50 series : R03 or earlier Thermo FLEX F50 series : R21
Version 2.9H 3.0
File name NS9500STD_forF50_V2_9H.zip NS9500STD_forF50_V3_0.zip
File size 52.2MB 50.9MB

To Top of  Page

Products
Micro Joining Equipment
Infrared Thermal Imaging Camera
Support
Infrared Thermal Imaging Camera
Intelligent Projector
Company Profile
Company's Outline
History
Offices
Contact Us
Micro Joining Equipment
Infrared Thermal Imaging Camera
Multi-Layered Board (product-mlb@ml.avio.co.jp)
Radiation Hardened POL DC/DC CONVERTER (product-me@ml.avio.co.jp)