NS9500STD-B (NS9500 Standard) Multi-Function Report Generator Program Free Update Program
Version 7.1E / S7.1E
Thank you very much for your using our NS9500STD-B (NS9500 Standard).
This is a free service to update the NS9500STD-B (NS9500 Standard) to the latest version 7.1E / S7.1E.
Remarks
Please uninstall any older version first (if any) before installation of the latest one.
The points of change from version 7.1D / S7.1D to 7.1E / S7.1E
- Fixed a bug that caused the PC to crash when a report is output with “zoom display” set (condition: set several points)
- Fixed a bug that caused an error message to be displayed while converting a large SVX file to an AVI file and the conversion to be terminated.
- Fixed a bug that the program terminates abnormally when “Display coordinates” is disabled in the options and the “Excel export” is output.
- Fixed a bug that caused the program to terminate abnormally when the thermal image was enlarged and the “Original image size” was selected and output when outputting an image copy of file export.
Software Overview
| Software name | InfRec Analyzer NS9500 Standard |
|---|---|
| Version | 7.1E |
| Supported Models | R550 series : V01R04 or earlier R450 series : V01R05 or earlier G100 series : R22 or earlier R500EX series, R500 series, R300SR series, R300 series *Caution "V01R04", "V01R05" or "R22" shows the "revision number". This revision number is listed on the rating label at the bottom or side of camera. * Version 2.7A is recommended when using the following model. H2600 series, S30 series, F30 series, TVS-500 series, TVS-200 series, TH9260, TH9100 series, TH7800 series, TH7100 series, TH5100 series, TS9260, TS9230, TS9100, TS7302 |
| File Name and Size | NS9500STD_V7_1E.zip (89.7MB) |
| Software name | InfRec Analyzer NS9500 Standard |
|---|---|
| Version | S7.1E |
| Supported Models | R550 series :V01R06 , R450 series : V01R07 , G series : R51 *Caution "V01R06", "V01R07" or "R51" shows the "revision number". This revision number is listed on the rating label at the bottom or side of the camera. |
| File Name and Size | NS9500STD_VS7_1E.zip (87.3MB) |
Rating label
R550Series, R450Series
The rating label is attached to the bottom of the camera.
G Series
The rating label is attached to the side of the camera.
Please confirm whether the model of present use is applied to the object model and the object file before downloading.
System Requirements
- Windows10 Home(32bit/64bit) / Windows10 Pro (32bit/64bit) / Windows10 Enterprise (32bit/64bit)
- Windows7 Ultimate (32bit/64bit)/ Professional (32bit/64bit) /Home Premium (32bit/64bit) English version support
Procedure
- Find the request form from the below link, complete and send it to us.
- URL (web address), ID and password for download will be sent to your e-mail address (after validation of the request that might takes few days).
- Download and save "NS9500STD_V7_1D.zip" or "NS9500STD_VS7_1D.zip" to your designated folder.
- Launch "NS9500STD_V7_1D.zip" or "NS9500STD_VS7_1D.zip" to be extracted into a folder you choose in your PC.
- Start the AutoRun.EXE in an appropriate folder and install, following instructions to come up.
Download
Please request URL, ID and password to download installer, by sending the form below.
Please have your NS9500 ready as its serial number is required for installation.
Version up program
| Version | 7.1E | S7.1E |
|---|---|---|
| File name | NS9500STD_V7_1E.zip | NS9500STD_VS7_1E.zip |
| File size | 89.7MB | 87.3MB |