![Infrared Camera [InfReC]](/en/products/ir-thermo/images/infrec-logo.jpg){kind=logo}
[InfReC] is the coined abbreviation word of "Infrared Camera" and also has the meaning of [The Device Recording Infrared Information].
Our product research and development is targeted at improving the quality of life by protecting people and simplifying their daily tasks while measuring temperature, controlling environments, enhancing security, etc.
InfReC S30 Series: Examples of System Architecture
Discontinued Model
Examples of System Architecture
PC Connection Mode
Ethernet interface enables remotely-controlled monitoring and real-time thermal image transfer and recording by PC (pier to pier or over the network). Graphics such as point temperature are displayed on image coming from analogue video output, which helps setup process.
Stand-Alone Mode
Once various parameters have been set using the Remote Control Software, the camera can be disconnected from the PC to operate as a Stand-Alone Monitoring Unit.
Temperature Alarm can be programmed and kept operated to give out alarm signal (1 condition: threshold below/ above, box / entire FOV, number of pixel and frame etc.). Real-time Image is monitored with user's preprogrammed graphics (point temp) via analogue video output.
Multi-Unit Network Connection Mode
Software Development Kit (SDK) allows users to design their own system to operate maximum of 15*1 cameras in parallel.
- *1 Frame rate might be affected, depending on the number of connected cameras and other network conditions.
Functions of the Remote Control Software
- Setting Measurement Parameters
- Setting Alarm Parameters
- Capturing Thermal and Visible Light Image Data*3
- Simultaneous Capturing of Thermal and Visible Light Images.(for still images only)
- File Formats*4
- Still Image : SIX Format
- Video File : SVX Format
- *3 With the InfReC Analyzer Lite (standard accessory), saved data can be displayed as thermal / visible light images or used for temperature analysis.
- *4 These are NEC's original file formats.
- • Specifications and outline on this page are subject to change without notice for improvement.
- • Company names and commodity names are trade names or registered trade marks of each company.
- • Nippon Avionics Co., Ltd. will not be responsible for any damage of infrared detectors due to incoming strong light (e.g. laser) through lens(es).
- • This product is subject to Japanese Export Control Law. Depending on its destination, prior assessment and authorization may be required. When exporting from country of initial purchase destination, please be sure to follow that country's export regulations as it may require an export permit beforehand.