TH71-717 Data Capture Program Free version up program
 
   Version 2.0 to 2.0G → 2.0H

Thank you very much for your using our TH71-717 Data Capture program.
This is a free service to upgrade the TH71-717 Data Capture program 2.0 to 2.0G, to Version 2.0H.
The Points of Change From Version 2.0 to 2.0G → 2.0H
– The points of change from version 2.0G to 2.0H
     a)  Trouble to which the data acquired in normal mode(∑8) was displayde in the FAST mode was corrected.
– The points of change from version 2.0F to 2.0G
     a)  When the level sense is changed while recording when the clock of the camera and PC is different, the trouble changed to the clock of the camera is corrected.
– The points of change from version 2.0E to 2.0F
     a)  The name of the company was changed.
– The points of change from version 2.0D to 2.0E
     a)  The problem of the asynchronous communication generated by a part of PC was corrected.
     b)  It came to operate on Windows Vista.
– The points of change from version 2.0C to 2.0D
     a)  Corrected failure that communication is not available through optical repeater by using WindowsXP.
– The points of change from version 2.0B to 2.0C
     a)  Problem that the temperature value is not calculated if the point emiss is changed, is solved. (This problem is occurred at the thermal image reply program attached to the Ver.2.0B)
– The points of change from version 2.0A to 2.0B
     a)  Problem that the recording at 1/30s although the interval measurement is set at 1/60s, is solved.
(this problem is occurred with the program is integrated with TH9100 series)
     b)  Improve the function to select 1/60s interval measurement during FAST x 2, 4 setting.
– The points of change from version 2.0 to 2.0A
     a)  Correct the problem of functionality in saving SIT file, where the condition information was wrongly saved if the displayed thermal data was saved as SIT file format.
     b)  Correct the problem of the functionality in the RUN MODE, where it didn't work depending on the remaining size of your hard disk in PC.
* Remarks:
Please go to execute the upgrade after uninstalling the lower version.

   Operation environment
     Windows 2000 English version support
Windows XP Home Edition English version support
Windows XP Professional English version support
Windows Vista Ultimate English version support

   How to Install
1.  Fill out the request form of download pass word.
2.  Download file address, ID and pass word will be returned to your e-mail address.
3.  Down load the free update program “TH71-717_2_0H.EXE" to your PC.
* the file extension such as “.EXE" are usually hidden in the Windows Explore.
4.  Execute TH71-717_2_0H .EXE and decompress any folder in your PC.
5.  Execute the SETUP.EXE of the folder “TH71-717" and install in accordance with the message appears.

   Operation Condition
 ·  All copyrights on this program are reserved by Nippon Avionics Co., Ltd. Unauthorized copying, reproduction, or modification of this software in whole or in part is prohibited.
 ·  This program can be downloaded and used only for the purpose of updating your licensed TH71-717 Data Capture program. It is prohibited to down load and use this program for the other purpose.
 ·  The contents of this program are subject to change without prior notice.
 ·  This program shall be available for the customers uses our product.

   Down load
Please request ID and password for down load, by filling out and sending “THE REQUEST FORM of DOWNLOAD PASSWORD".
 
– Version up program
    [Version]  :  2.0H
    [File name]  :  TH71-717_2_0H.EXE (Self-extract application)
    [File size]  :  7.54MB

Infrared Thermal Imaging Camera Support
Products
Micro Joining Equipment
Infrared Thermal Imaging Camera
Multi-Layered Board
Support
Infrared Thermal Imaging Camera
Intelligent Projector
Company Profile
Company's Outline
History
Offices
Contact Us
Micro Joining Equipment
Infrared Thermal Imaging Camera
Multi-Layered Board (product-mlb@ml.avio.co.jp)
Radiation Hardened POL DC/DC CONVERTER (product-me@ml.avio.co.jp)